Lista de Productos

PRODUCT CATEGORIES

Pipeline Anti-Corrosion Inner tape

Contactar ahora

Añadir al carrito Chatear Ahora

Descargar:

Información básica

Modelo: GF100

Uso: Industrial

Material: Caucho butílico

Peel Adhesion To Primed Steel: 30 N/cm

Water Vapor Transmission Rate: 0.08g/m2

Color: Black

Thickness: 0.38mm,0.51mm,0.65mm,0.76mm

Width: 50mm,100mm,150mm

Length: 30m,61m,122m

Tensile Strength: 60 N/cm

ELONGATION: 300%

Feature: Cold Applied

Applied: Underground For Pipeline

Información adicional

Paquete: export standard carton packing with membrane protect &crossed .

productividad: 100Ton/Month

Marca: Polyken

transporte: Ocean,Land,Air

Lugar de origen: China

Capacidad de suministro: 100Ton/Month

Certificados : ISO SGS

HS-Code: 39191099

Hafen: Qingdao,Ningbo,Tianjin

DDescripción

Description

Jining Qiangke Pipeline Inner tape is used as the base material which is coated by the liquid butyl rubber film,

both of which are pressed and compounded. Pipeline Inner tape will protect the pipe and its anti-corrosion tape

surface from pipeline damages.Pipeline Inner tape have been specially developed for high-quality, corrosion

protection for joints, in cases where the pipeline has already been installed. The material is easy, safe and quick to

apply on welded joints, bends and other complicated shapes.

Backing : Special blend of stabilized polyethylene

Adhesive : Butyl rubber and Adhesion Promoting Resins

Total tape thickness in mils:15mils(0.381mm),20mils(0.508mm),25mils(0.635mm),30mils(0.762mm)

Tape width in inches:2"(50mm),4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm)

Tape roll length in feet:100ft(30M),200ft(61M),400ft(122M),600ft(183M),800ft(244M)

Pipeline Inner tape

Product Properties	Test method	Typical Value
Product Properties	Test method	POLYKEN955-15	POLYKEN955-20	POLYKEN955-25	POLYKEN955-30
Total Thickness		15mil(0.381mm)	20mil(0.508mm)	25mil(0.635mm)	30mil(0.762mm)
Backing of PE film		10mils(0.254 mm)	15mil(0.381mm)	20mil(0.508mm)	25mil(0.635mm)
Butyl Rubber Adhesive		5 mils(0.127 mm)	5mil(0.127mm)	5mil(0.127mm)	5mil(0.127mm)
Tensile Strength	ASTM D1000	50N/cm	60N/cm	70 N/cm	80 N/cm
Elongation	ASTM D1000	300%	350%	350%	450%
Peel Adhesion to Primed Steel	ASTM D1000	24 N/cm	25 N/cm	26.5 N/cm	33 N/cm
Water Vapor Transmission Rate	ASTM E 96	0.10g/m2	0.10g/m2	0.08g/m2	0.06g/m2
Water absorption after 1 day,At+23℃	ASTM D570	0.10%	0.10%	0. 08%	0. 06%
Volume Resistivity	ASTM D 257	2.0 x 1015 ohm.cm	2.5 x 1015 ohm.cm	2.6 x 1015 ohm.cm	2.6 x 1015 ohm.cm
Dielectric Strength	ASTM D149	30 kv	36 kv	43 kV	45 kV